Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Broken Arrow Homeowners
Chimney repair in Broken Arrow usually starts with one of three problems: a cracked crown letting water into the masonry, a rusted cap that no longer keeps rain and animals out, or a liner that has worn thin behind a wood-burning fireplace. We handle all three, and we don’t hand the job off to anyone else. Flagship Chimney Sweep is a full-scope chimney company: we sweep, we inspect, we repair, and the same technician who diagnoses the problem is qualified to fix it. Our technicians have up to 8 years of experience with the trade’s standard repair materials, including DuraFlex liners and HeatShield resurfacing.
Broken Arrow sits in a stretch of Oklahoma where summers bake masonry and winters swing hard between freeze and thaw. That cycle is what cracks crowns, opens mortar joints and works flashing loose over time. Our free estimate tells you what your chimney actually needs, with the camera evidence to back it up, before anyone books a repair. Call (866) 389-4464. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap Installation
Chimney Cap Installation is the fitting of a protective cover over the flue opening to keep rain, birds, squirrels and debris out of the chimney while still letting smoke escape. You need one when a chimney has no cap at all, when the existing cap is a simple screen that rusts through in a season or two, or when you have had animals in the flue. We size the cap to the flue and the crown, seal it down properly, and lean on proven hardware like Gelco caps rather than the thinnest mesh available. Chimney cap installation in Broken Arrow typically runs $150 to $450 depending on the flue size and the cap material, and the written estimate sets the final price.
Single-Flue and Multi-Flue Caps
A single-flue chimney takes one cap sized to that opening. Multi-flue chimneys need a full-width cap that covers every flue at once, and getting the footprint right matters more than the cap itself.
Stainless and Powder-Coated Options
Stainless steel holds up best against Oklahoma weather swings. Powder-coated steel costs less up front and can look tidy on a painted chimney, but it needs a closer eye over the years.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is the removal of a failed cap and the fitting of a new one before the old failure does damage below. You need a replacement when the mesh has rusted open, when the cap is bent or loose after a storm, or when the top plate has started to sag and let water pool on the crown. We pull the old cap, check the crown and flue tile while we’re up there, and install a correctly sized replacement. Expect chimney cap replacement in Broken Arrow to land around $150 to $450, with the exact figure set by your written estimate based on size and material.
Spotting a Cap That Has Failed
Rust streaks running down the chimney, a mesh that sags when you look up the flue, or birds circling the rooftop are all reasons to look closer. A cap that has lost its screen has stopped doing its main job.
When a Repair Beats a Full Swap
Sometimes a cap only needs re-seating and fresh sealant around the base. If the metal itself is sound, we’ll tell you that instead of selling a replacement you don’t need.
Chimney Liner Installation
Chimney Liner Installation is the fitting of a new flue liner inside an existing chimney to carry smoke and gases safely to the top. You need it when the original clay tile liner is cracked or missing, when a fuel-burning appliance is venting into an unlined flue, or when the flue is the wrong size for the heating system attached to it. We install DuraFlex liners, size the flue to the appliance, and insulate where the setup calls for it. Chimney liner installation in Broken Arrow typically runs $2,000 to $5,500 depending on flue length, liner type and whether insulation is needed. The written estimate sets the final price.
Clay Tile Versus Stainless
Clay tile is what most Broken Arrow homes were built with, and it cracks under heat cycling. A stainless liner flexes with the chimney rather than against it and lasts through the swings.
Why Liner Size Matters
An oversized flue runs cold and drafts poorly. An undersized flue chokes the appliance. Matching the liner to the heating system is the whole point of the job.
Chimney Flashing Repair
Chimney Flashing Repair is the correction of the metal seal where the chimney passes through the roof, which is one of the most common sources of ceiling stains in Broken Arrow homes. You need flashing repair when you see water staining on the ceiling near the chimney, rusted or lifted flashing, or cracked sealant along the roof line. We reset and reseal the flashing, replace sections that have rusted through, and check the counter-flashing against the masonry. Chimney flashing repair in Broken Arrow generally falls between $250 and $800 depending on roof pitch and how much of the flashing needs replacing, with the written estimate setting the final figure.
Water Stains and Where They Come From
A stain on the ceiling doesn’t always mean the roof is failing. Chimneys collect water at the flashing, and the leak usually shows up well away from the actual break.
Resealing Versus Rebuilding the Flashing
Fresh sealant buys time when the metal is still sound. Once the flashing itself has rusted or pulled away from the roof, sealing over it just hides the problem.
Chimney Crown Repair
Chimney Crown Repair is the fixing of the concrete cap at the very top of the chimney that sheds water away from the masonry below. You need it when the crown has visible cracks, when it has pulled away from the flue tile, or when water is finding its way down the outside of the chimney after rain. We repair minor cracking with HeatShield resurfacing material and rebuild crowns that have broken down too far to patch. Chimney crown repair in Broken Arrow usually runs $300 to $900 depending on the crown’s size and how much rebuild is involved, and the written estimate sets the final price.
Cracks That Keep Coming Back
A hairline crack that reappears every season means water is still getting underneath. Patching over it without addressing the cause just resets the clock.
Resurfacing Instead of Rebuilding
HeatShield resurfacing lets us restore a crown that’s still structurally sound without tearing it out. It’s a long-term fix rather than a temporary patch, and it costs less than a full rebuild.
Chimney Repair Companies
Chimney Repair Companies vary widely in what they actually do in-house, and that difference shows up once the diagnosis is done. You need a company that can sweep, inspect and repair without handing you off, especially when a camera inspection turns up something that needs fixing right away. Flagship Chimney Sweep keeps the repair in-house, so the technician who inspects your chimney is qualified to fix it, and we use recognized industry-standard components from DuraFlex, HeatShield and Olympia Chimney. Chimney repair in Broken Arrow typically runs $300 to $3,000 depending on the scope, and the written estimate sets the final number.
Questions Worth Asking Before You Book
Ask who actually does the repair work and whether it’s subcontracted. Ask what happens if the inspection finds something the crew didn’t expect. A straight answer tells you a lot.
Why In-House Repair Matters
When inspection and repair live under one company, nothing gets lost between diagnosis and the fix. You’re not waiting on a second appointment with a stranger who hasn’t seen the chimney.
Chimney Masonry Repair
Chimney Masonry Repair is the correction of damage to the brickwork and mortar joints that make up the chimney’s structure. You need it when mortar is crumbling and falling out in chunks, when bricks are spalling or flaking on the face, or when the chimney is leaning or separating from the house. We repoint joints, replace damaged brick, and address the water intrusion that caused the damage in the first place. Chimney masonry repair in Broken Arrow generally runs $500 to $3,000 or more depending on the height and how much of the stack needs work, and the written estimate sets the final price.
Spalling Brick and Freeze-Thaw Damage
Oklahoma’s freeze-thaw cycle works on any brick that has already absorbed water. Once the face starts flaking, that brick can’t be saved by repointing alone.
Repointing Versus Rebuilding
Repointing restores sound brick with fresh mortar. When the damage runs deeper into the stack, a partial rebuild is the honest answer, and we’ll tell you which one applies.
Brands We Service
We work with DuraFlex liners and know where they wear when a flue has been run hard. We service HeatShield resurfacing systems and understand how they bond to a crown over time. Gelco caps are a standard we install and replace, and we know the failure points on Olympia Chimney components well enough to diagnose them quickly.
Because we work across these product lines regularly, our recommendations are driven by what the chimney actually needs, not what happens to be on hand. Whether you have DuraFlex, HeatShield, Gelco or Olympia Chimney equipment, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water stains on the ceiling or chimney breast after rain. This usually points to flashing or crown failure, and it gets worse the longer it’s left. Water finding its way into masonry can freeze and crack it further over a single winter.
- Crumbling mortar or bricks on the ground near the chimney. Falling mortar means the joints have given up. Left alone, the stack loses structural strength, and the repair gets bigger with each season.
- A strong smoky smell in the house even when the fireplace isn’t lit. This can mean a blocked or damaged flue that isn’t drafting properly. It’s worth a professional look before you burn again.
- Visible cracks in the crown at the top of the chimney. A cracked crown lets water straight into the masonry. Small cracks are cheap to fix; a failed crown often means rebuilding the top of the stack.
- Rust streaks on the exterior or a loose cap. A failed cap lets water and animals in and lets sparks out. Getting a new cap fitted is one of the simpler repairs we do, and it protects everything below.
If you’re seeing more than one of these, it’s worth getting the chimney looked at before the next burn season. Call (866) 389-4464 for a free estimate.
Our Process, Step by Step
- 1
We talk through what you’re seeing. Water stains, smoke backing up, a smell, or just a chimney you haven’t had checked in years. That conversation shapes what we look for when we arrive.
- 2
We inspect before we quote. Camera inspection and a close look at the crown, cap, flashing and masonry. We photograph what we find so you can see it yourself, not just take our word for it.
- 3
We explain your options in plain terms. What needs fixing now, what can safely wait, and what the difference costs. Nothing gets recommended without evidence you can look at on the spot.
- 4
We repair it with the right materials. DuraFlex liners, HeatShield resurfacing, Gelco caps and Olympia Chimney components where they fit the job. Built to last, not built to get us back next season.
- 5
We check the work and leave the site clean. A final look at the finished repair, a sweep if it’s needed, and a clean-up so your home looks the way it did before we arrived.
How Much Does Chimney Repair Cost in Broken Arrow?
Chimney repair in Broken Arrow typically costs between $150 and $5,500, and the honest answer is that it depends on what’s actually wrong. A typical cap installation runs $150 to $450. Chimney flashing repair runs $250 to $800. Crown repair is usually $300 to $900, and masonry repair runs $500 to $3,000 or more depending on the height and how much of the stack needs work. Liner installation is the biggest job at $2,000 to $5,500, and that range depends on flue length, liner type and whether insulation is required.
What affects the price most: how high the chimney rises, how much of the masonry is damaged, whether the liner needs replacing or just cleaning, and the material you choose. A short chimney with a cracked crown is a small job. A tall stack with spalling brick and a failed liner is not.
To avoid overpaying, get the camera evidence before you approve anything. Any repair recommendation should come with a photo or video of the actual problem, and we include that with our inspection. A reputable company will also tell you plainly when something can safely wait a season.
Every flagships chimney sweep estimate is free, and the written estimate sets the final price. Nothing is added after the fact. Call (866) 389-4464 to book yours.
Our Service Area Near Broken Arrow
We serve homeowners across Broken Arrow and the surrounding towns, including Wagoner, Inola, Oakhurst, Haskell, Kiefer, Justice, Sperry, Kellyville and Tulsa. If you’re in or near Broken Arrow and need chimney repair, we’ll confirm timing when you call. We book each job around your schedule, with fast dispatch from 7am to 7pm, Sunday through Friday. Wherever you are in the area, you can reach us at (866) 389-4464. For homeowners in Wagoner, see our chimney repair page.
Serving Broken Arrow, OK – Our Local Coverage Area
We serve Broken Arrow and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Broken Arrow
Chimney repair is any fix to the parts of the chimney that keep it safe and weather-tight: the crown, cap, flashing, liner and masonry. It’s distinct from sweeping, which removes creosote and debris, and from inspection, which finds the problems in the first place. At Flagship Chimney Sweep we handle all three, so the same company that inspects your chimney is the one that repairs it. Call (866) 389-4464 for a free estimate.
Most chimney repairs in Broken Arrow are finished within a day. Cap replacement and flashing repair are typically a couple of hours. Crown repair takes longer if we’re rebuilding rather than resurfacing. Liner installation can take most of a day depending on flue length. We’ll tell you the expected timeline when we give you the written estimate, so there are no surprises.
Chimney repair in Broken Arrow typically runs $150 to $3,000, with liner installation reaching $5,500 on larger jobs. The range covers cap work, flashing, crown repair, masonry and liners, so the only meaningful number is the one on your written estimate. That estimate is free, and it’s based on what we actually find during inspection. Call (866) 389-4464 for an exact quote.
Yes. We install and service DuraFlex liners and HeatShield resurfacing systems, and we know where each one wears over time. We also work with Gelco caps and Olympia Chimney components. Whether you have DuraFlex, HeatShield or another brand entirely, we can help.
Yes, we can often get to same-day repairs when a job is booked that morning. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening. Call (866) 389-4464 to book.
We use name-brand, warrantied components rather than generic substitutes, and the warranty terms for the material come with the written estimate. For the labor, we stand behind the work and address anything that isn’t right. Ask us about the specific warranty on your job when we go over the estimate, and we’ll explain it clearly.
Clear the area around the fireplace and give us access to the chimney from inside the house. Move anything breakable off the hearth and make sure the flue isn’t blocked by furniture. If pets are nervous around strangers, keep them in another room. Beyond that, we handle the rest, including the drop cloths and the clean-up.
Schedule Your Chimney Repair Service in Broken Arrow Today
If your Broken Arrow chimney needs a repair, don’t wait for the next storm to find out how bad it is. We’ll inspect it, show you what we find, and fix it with professional-grade materials. One company from sweep to repair, no runaround. Call (866) 389-4464. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free and there’s no obligation. For more on our chimney repair work, or to start with a Flagship Chimney Sweep inspection, give us a call.
Written by the team at Flagship Chimney Sweep.