Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Broken Arrow?
Chimney cap and crown work in Broken Arrow typically runs $175 to $450 for a cap and $450 to $1,400 for crown repair or rebuild, depending on whether you need a simple re-seal or a full concrete replacement. A standard galvanized cap on a single flue usually lands on the low end, while a custom stainless cap over a large masonry chimney or a crown rebuild on a two-story house pushes toward the top of the range. The written estimate is what sets your final price, and it costs nothing to get one.
We’re Flagship Chimney Sweep, and caps and crowns are two of the most common repairs we handle across Broken Arrow. Our technicians have up to 8 years of experience, and they inspect the full chimney before recommending anything. If the crown is cracked and the cap is missing, you’ll hear about both from the same company that can fix both.
Key Takeaways
- A standard chimney cap runs about $175 to $450 installed.
- Crown repair or resurfacing runs about $450 to $900; a full rebuild runs $900 to $1,400.
- Most caps and crowns can be done in a single visit by the same company that inspects the chimney.
- Cracked crowns and missing caps let Broken Arrow rain and freeze-thaw cycles into the masonry, which turns a $500 job into a $3,000 one.
- Estimates are free and the written estimate sets the final price.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers shake out for a typical Broken Arrow home. These are estimated ranges for the local market in 2026, not quotes. Every chimney is different, so the written estimate is what you’ll actually pay.
| Item | Typical Estimated Cost |
|---|---|
| Single-flue galvanized cap (installed) | $175 – $300 |
| Stainless steel cap, single flue (installed) | $250 – $450 |
| Multi-flue custom stainless cap (installed) | $450 – $900 |
| Crown crack sealing / minor repair | $450 – $700 |
| Crown resurfacing (HeatShield or similar) | $600 – $900 |
| Full crown rebuild (concrete, new overhang) | $900 – $1,400 |
| Chimney inspection (Level 1 or 2) | $100 – $300 |
| Cap and crown together, bundled | $650 – $1,800 |
What pushes the price up? Height is the biggest one. A chimney that’s 20 feet above the roofline takes longer to work on than one that’s 8 feet, and the labor reflects it. Masonry shape matters too: a large, wide crown with a proper overhang needs more concrete and more form work than a small square one. Custom caps sized to an odd flue count or an unusual footprint cost more than a stock single-flue cap. And if the crown has already failed and water has been getting in, the underlying brick may need repointing before a new crown goes on, which adds to the bill. What pushes it down: doing the cap and crown in the same visit, and catching the crack before it spreads to the flue.
Material choice moves the number more than most people expect. A galvanized cap does the job and costs less up front, but in Broken Arrow’s summer heat and winter freezes it tends to wear out faster than stainless. Stainless or copper holds up better and, over the life of the chimney, usually ends up the better value. We carry Gelco, Olympia Chimney, Famco and Copperfield caps because those are the ones that survive our weather, not because they’re the cheapest on the shelf.
What Affects Chimney Cap & Crown Pricing in Broken Arrow
- Chimney height and roof pitch. A tall chimney on a steep roof takes longer and more care to access safely than a short one on a shallow pitch. Broken Arrow’s mix of one-story ranch homes and taller two-story builds means we see both ends of this, and the estimate reflects which one you have.
- Number of flues. A single-flue cap is a simple job. A chimney serving a fireplace, a furnace flue and a water heater vent at once needs a custom multi-flue cap sized and fabricated to fit, and that costs more.
- Condition of the crown. A hairline crack can be sealed. A crown that’s crumbled away from the flue at the bond break needs a rebuild. Those are very different jobs, and the difference between $450 and $1,400 usually comes down to this one factor.
- Masonry vs. prefab. A factory-built fireplace with a metal chase takes a different style of cap than a full masonry chimney, and the two aren’t priced the same. Tell us which you have when you call and we can give you a closer estimate over the phone.
- Damage underneath. Freeze-thaw cycles in the Broken Arrow area work on any crack that lets water in. When a crown has been failing for a few seasons, the top courses of brick behind it can be soft or spalled, and repointing those before a new crown goes down adds to the cost. Skipping that step is how a repair gets done twice.
- Access and equipment. The materials are a smaller part of this bill than the time on the roof. A chimney set back behind a steep dormer or crowded by tree limbs takes longer to reach and work around, and that shows up in the quote.
How to Save on Chimney Cap & Crown in Broken Arrow
The single biggest saving is timing. A crown crack the width of a credit card, sealed now, runs a few hundred dollars. Let it grow for two or three seasons of Oklahoma weather and you’re looking at a full rebuild plus repointing, and possibly flue work above that. Fixing the crown before winter is the cheapest thing you can do for a chimney.
Second: combine the cap and crown into one visit. If both need attention, doing them together saves the setup time and the second trip, and most companies price them that way. Ask for a bundled number rather than two separate quotes.
Third: skip the bargain cap. A cheap galvanized cap that rusts out in a few seasons and lets water in through a rusted top isn’t a saving, it’s a delay. A stainless or copper cap from a brand like Gelco or Copperfield costs more up front and lasts long enough that you won’t be doing it again soon. Built to last, not built to get us back next season.
Fourth: get a real inspection before you decide anything. Sometimes what looks like a crown problem from the ground is a flashing issue, and sometimes a cap is all you need. We inspect it, we fix it, no runaround. The estimate is free, so there’s no reason to guess. Call (866) 389-4464. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Broken Arrow?
A chimney cap in Broken Arrow typically runs $175 to $450 installed, depending on the material and whether it’s a stock single-flue cap or a custom multi-flue build. Stainless and copper sit at the higher end and last longer than galvanized in our weather. Call (866) 389-4464 for an exact quote; estimates are free.
Is it cheaper to repair or replace a chimney crown?
Repair is almost always cheaper when the damage is small: sealing hairline cracks runs about $450 to $700, while a full crown rebuild runs $900 to $1,400. The catch is that a crown already pulling away from the flue or crumbling at the edges can’t be reliably patched, and sealing it just postpones the rebuild a season or two. An inspection tells you which one you’re facing. Call (866) 389-4464 to book one.
Can you do a chimney cap and crown the same day?
Yes, in most cases a cap and crown repair can be completed in a single visit, since both are top-of-chimney work and the crew is already there with the materials. A full crown rebuild may need a second visit if the concrete needs to cure before the cap goes on. We answer 24/7, and fast dispatch from 7am to 7pm gets you on the schedule.
Why is my crown cracked in Broken Arrow?
Crowns crack from water getting into small gaps and then freezing and expanding. Broken Arrow sees enough freeze-thaw cycling each winter to open those gaps season by season, and a crown that isn’t sloped properly holds water instead of shedding it. A cap doesn’t stop that, but a sealed crown with the right slope and a proper cap on top does.
Do I need a permit for chimney cap or crown work in Broken Arrow?
Most cap and crown repairs don’t require a permit, but a full crown rebuild on some homes can, depending on your city’s building department rules at the time. It’s a quick question for the city, and we’ll flag it if your job looks like one that needs a permit before any work starts. The written estimate always sets the final price, so you know the number before anything begins.
Why Get the Crown Right the First Time
Your chimney is a safety system first. The crown is the part that keeps water out of the masonry, and the cap is what keeps water, animals and debris out of the flue. Both fail quietly. You won’t notice a cracked crown until water has been getting in for a season or two, and by then the repair has grown. On a masonry chimney, a steady water leak can soften the mortar and brick at the top, and in the worst cases that water reaches the flue liner. That’s where a top-of-chimney fix stops being cosmetic and starts being a safety issue. Liner problems belong to a trained technician, not a weekend project.
We do the sweep, the inspection and the repair as one company. That matters here. When the same technician who climbs up and finds the cracked crown is the one who repairs it, nothing gets lost between appointments and no one has to come back out to look at it again. We use recognized industry-standard products on every repair: HeatShield for crown resurfacing, DuraFlex for liner work when it’s needed, and caps from Gelco, Olympia Chimney, Famco and Copperfield. The materials are specified to fit the chimney, not picked off a shelf because they’re on sale.
If you’re not sure whether you need a cap, a crown or both, start with an inspection. We’ll tell you what we find, what it costs to fix, and what happens if you wait. No pressure to do anything beyond what the chimney actually needs.
Call (866) 389-4464 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm gets a technician out to look at your chimney. One company from sweep to repair, on every job.
Pricing reflects the Broken Arrow market as of 2026. Flagship Chimney Sweep offers free estimates – call (866) 389-4464.
Written by the team at Flagship Chimney Sweep.
What Our Customers Say
"Got a text with the technician's name and photo before he arrived. Small thing, but as a woman home alone during the day I actually really appreciated it."
- Brianna Whitfield"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Stephanie Mercer"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Travis Miller