Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Broken Arrow Homeowners Choose DuraFlex Chimney Cleaning
We provide independent DuraFlex chimney cleaning in Broken Arrow, and what sets our DuraFlex work apart is that we service the liner as an engineered system rather than just brushing a flue. A DuraFlex flexible stainless liner has a tee, a top plate, a cap and often an insulation wrap, and each of those has its own failure pattern in Oklahoma weather. We know those points cold because we’ve swept, inspected and rebuilt these systems across the Tulsa metro. Call us at (866) 389-4464.
Broken Arrow’s growth tells you a lot about the chimneys here. A large share of the work in subdivisions like Forest Ridge and The Village at Wagoner sits on 1990s to 2010s builder-grade wood-burning fireplaces and gas inserts, systems with prefab metal flues that call for rotary sweeping and a Level 2 camera inspection. That’s a different animal from the masonry chimneys common in older Tulsa neighborhoods a few miles west.
One thing to be clear about: we are an independent DuraFlex service provider. We’re not affiliated with, authorized by, sponsored or endorsed by DuraFlex. We’re just experienced with how these systems actually age in Broken Arrow.
Why Trust Flagship Chimney Sweep for Your DuraFlex Chimney Cleaning?
Our technicians have up to 8 years of experience with flexible stainless liner systems, and DuraFlex products get the same care we bring to every brand in our rotation. We clean to the liner’s spec, not around it. That means rotary tools matched to a flexible stainless wall rather than stiff rods that can nick a seam, and a camera run through the length of the flue so we can see what the brush can’t reach.
Parts matter. When a DuraFlex run needs a repair, we use DuraFlex-compatible OEM-style liner components and caps when they’re available, and quality aftermarket stainless parts when lead times or budget demand it. Either way we match alloy and gauge to the original so the repair doesn’t create a weak point. Service stays warranty-safe because we don’t cut corners that void a liner’s coverage: no undersized components, no mixed metals that invite corrosion, no patch that hides a failing seam.
The same standard holds across HeatShield and Gelco work. Professional-grade materials on every job, which is what the Flagship name is meant to signal.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Fix in Broken Arrow
These are the issues we see most often on DuraFlex systems in Broken Arrow. Each one has a cause worth understanding, because it tells you what to ask for at inspection.
- Seams and joints opening after thermal cycling. Years of heating and cooling work flexible liner seams loose. When a seam opens, creosote collects behind the liner where a brush never reaches, and draft drops. A camera inspection is the only reliable way to catch it before it becomes a fire risk.
- Top-plate and cap corrosion. Wind-driven rain and winter ice attack the stainless cap and top plate. Once water gets past them, it works down the flue and rusts the crown. Broken Arrow’s ice storms and high winds make this a recurring problem, and builder-grade caps on 1990s and 2000s houses are especially exposed.
- Insulation wrap breakdown on insulated reline kits. The wrap around an insulated DuraFlex reline kit can break down over time, which creates hot spots against framing and fails the clearances the liner was installed to hold. This one is a safety issue, not a maintenance item.
- Damper and firebox connection points loosening. On DuraFlex prefab fireplaces, the damper and firebox connections can loosen or warp. The symptom is smoke rollout into the room and a fire that’s hard to start.
- Water intrusion after hail or a limb strike. After a spring hailstorm or ice event, we commonly find chimney caps dented or torn off and crowns cracked on the windward side of homes in newer Broken Arrow subdivisions. Post-storm inspection is its own recurring need here, separate from normal creosote buildup.
A homeowner with a DuraFlex flexible liner often calls because the fireplace smokes back or the annual sweep keeps pulling out more creosote than expected. A Level 2 inspection typically reveals a separated liner seam or a corroded top plate letting water in. A qualified local sweep will camera the liner, check the cap and top plate, and either re-secure and re-insulate the existing DuraFlex run or recommend a reline if the stainless has failed.
DuraFlex Parts & Our Repair-vs-Replace Approach
We don’t stock DuraFlex parts and we don’t claim to. We source DuraFlex-compatible OEM-style liner components and caps when they’re available, and quality aftermarket stainless parts when lead times or budget make that the better call. Alloy and gauge get matched to the original either way, so the repair holds.
The repair-or-replace decision comes down to the liner’s condition, seen on camera. If a DuraFlex liner is sound, we clean and recommission it. If the seams or the insulation wrap are compromised, we recommend a full reline rather than patchwork. A failing liner is a safety issue, and patching one just postpones the reckoning. The written estimate sets the price, and nothing gets recommended that you can’t see for yourself on the inspection report.
Call (866) 389-4464 for a free estimate on your DuraFlex system.
Our DuraFlex Service Process – Step by Step
- 1
Diagnosis. We start with a Level 2 camera inspection of the full liner run, the tee, the top plate and the cap. On DuraFlex systems this is where seam separation, wrap breakdown and corrosion show up.
- 2
Cleaning or repair. If the liner is sound, we rotary sweep to remove creosote without stressing the flexible stainless. If a repair is needed, we re-secure and re-insulate the existing run or install a replacement with matched components.
- 3
Test. We check draft and watch for smoke rollout at the damper and firebox connections. A DuraFlex prefab that’s set up right starts clean and draws hard.
- 4
Warranty review. We walk you through what was done and how it sits against the liner’s coverage, so you know your service stayed warranty-safe and what maintenance keeps it that way.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Products We Service & Install in Broken Arrow
We work on the full range of DuraFlex systems found in Broken Arrow homes. That includes the DuraFlex Stainless Steel Flexible Chimney Liner in both round and oval profiles, and DuraFlex Reline Kits, insulated and uninsulated. We also service DuraFlex Pro and DuraFlex SW prefab chimney components, and DuraFlex multi-flue and custom caps.
Most of these show up in the builder-grade fireplaces and later gas-log conversions common in Broken Arrow subdivisions. Newer custom homes in South Broken Arrow often add masonry or stone outdoor fireplaces and pizza ovens, and those need periodic sweeping too. Whatever the setup, the approach is the same: inspect the whole system, clean what’s safe to clean, and fix what’s failed.
We Also Service These Brands
DuraFlex is one brand in our rotation, not the only one. We also handle HeatShield resurfacing and Gelco caps, along with Olympia Chimney, Famco and Copperfield systems. That range matters, because a recommendation should be driven by what your chimney needs, not by whatever brand we happen to favor. One company from sweep to repair.
FAQs – DuraFlex Chimney Cleaning Service in Broken Arrow
No. We are an independent DuraFlex service provider, not authorized, sponsored or endorsed by DuraFlex. We service their systems because we know how they age, not because of any manufacturer relationship.
Yes, with the right tools and technique. A flexible stainless liner needs rotary sweeping matched to its wall thickness, not stiff rods that can nick a seam. We camera the liner first so we know what we’re working around.
The camera tells you. If seams are separating or the insulation wrap is broken down, a full reline is the safe call rather than patchwork. If the stainless is sound, cleaning and recommissioning is all it needs. You see the evidence before anything is decided.
Not strictly, but it should match the flue’s alloy and gauge so corrosion doesn’t start at the junction. We use DuraFlex-compatible caps when available and quality aftermarket stainless when lead times call for it.
Smoke rollout at first light usually points to a loosened or warped damper or firebox connection, or a draft problem from creosote behind the liner. A Level 2 inspection finds which one it is.
Yes, every time. Wrap breakdown creates hot spots against framing and fails the clearances the liner was installed to hold, so we check it as part of the inspection rather than waiting for a symptom.
A standard sweep and inspection on a DuraFlex system usually runs a couple of hours, and a reline takes longer depending on the run and access. The written estimate lays out the scope before we start.
Pricing is set per job by the written estimate, and the estimate is free. The cost depends on the liner’s condition, how much creosote has built up and whether any repair is needed. Call (866) 389-4464 for an exact quote – estimates are free.
Book Your DuraFlex Service in Broken Arrow, OK
Your chimney is a safety system first, and a DuraFlex liner deserves a sweep who understands its seams, wrap and cap as well as its flue. We inspect it, we fix it, no runaround. Call (866) 389-4464 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Flagship Chimney Sweep.