Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Kellyville, OK
We provide independent Gelco service across Kellyville, and what makes our Gelco work here different is that we read the manufacturer’s own clearance and fit specs for every all-fuel system rather than treating each flue like ordinary masonry. Gelco makes chimney caps and venting components, and in Kellyville those components often sit on manufactured homes and small-acreage wood-stove installs where correct clearances and cap fit decide whether the system is safe. Our technicians have up to 8 years of experience, and we handle sweeping, inspection, and repair as one company. Call (866) 389-4464 for a free estimate.
Why Kellyville Residents Choose Us for Gelco Service
Gelco components turn up on a lot of the wood-burning setups around Kellyville, and we know how they’re built and where they fail. An all-fuel chimney is a listed system, which means the pipe sections, the support box, the flashing, and the cap all have to work together within the manufacturer’s clearances. When one piece is wrong, the whole run is compromised.
We’re an independent shop. We’re not affiliated with Gelco and we’re not an authorized dealer, so our recommendations come from what your chimney actually needs, not from a sales quota. What we do bring is fluency: we know which Gelco-compatible parts fit correctly and meet the same listing, and we install quality components that match the system rather than whatever is cheapest on the shelf.
Scheduling is straightforward. Tell us what you’re seeing (smoke backing up, a cap that rattles, a stove that’s burning unevenly), and we’ll book a visit. We answer 24/7 at (866) 389-4464, with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Kellyville
- Corroded galvanized all-fuel pipe. Gelco galvanized all-fuel chimney is factory-built venting for wood stoves, and it corrodes from the inside out. The outer skin looks fine while the inner liner pits. In Kellyville, where hedge (Osage orange) and oak burn hot and dirty from roughly November through March, this corrosion happens faster than most homeowners expect. A sweep that only brushes the flue won’t catch it; a camera inspection will.
- Loose caps and clogged screens. Gelco chimney caps and termination assemblies take a beating in Creek County’s spring thunderstorm and tornado season. Fasteners loosen, screens clog with soot, and caps rattle or blow off entirely. Once a cap is gone, rain goes straight into the flue, and the creosote below it gets wet and acidic. We replace caps and storm collars that have failed.
- Improper clearance on manufactured-home installs. Older manufactured-home installs around Kellyville often have Gelco support boxes and through-wall or through-roof assemblies hidden behind chasing or skirting. When clearances to combustibles were never right, or a radiation shield has failed, you find scorched framing behind the wall. We inspect for this specifically.
- Pulled or leaking seams. Where Gelco sections were cut short or poorly supported, joints pull apart. Creosote and condensate then drip onto the roof deck and into the ceiling cavity. Seam failures show up as staining on the ceiling or a musty smell in the attic.
- Storm-damaged flashing and crowns. Northeast Oklahoma storms crack crowns and loosen flashing around the pipe penetration. A gap at the flashing lets water track down alongside the chimney, and over a few seasons that shows up as rot or a ceiling stain far from the chimney itself.
Gelco Service in Kellyville: What Local Conditions Mean for Your Equipment
Most Kellyville-area homes fall under volunteer fire coverage out of a rural Creek County department. That’s a practical detail with real consequences for Gelco owners. When a soot-started chimney fire happens, neighbors often handle it before any professional sees the flue, and the fire gets run out rather than properly assessed. A stove fire that was put out with a garden hose or smothered with a damp log can leave heat damage behind: cracked pipe sections, warped metal, failed radiation shields, and creosote that re-hardened into a glaze. That’s why a Level 2 inspection on a Gelco system here should look for heat damage and cracked or warped pipe, not just creosote depth. If you’ve had a fire in the flue, tell us when you call.
Gelco Models & Products We Service in Kellyville
We service the Gelco components that show up on wood-burning systems around Kellyville: galvanized all-fuel chimney used for factory-built wood stove venting, stainless all-fuel chimney sections and fittings, chimney caps and termination assemblies, and the support boxes, flashing, and storm collars used on manufactured-home through-wall and through-roof installs.
When a part needs replacing, we choose Gelco-compatible OEM-spec pipe, caps, and support components where fit and listing matter, and quality aftermarket caps and flashing where they meet the same listing. On a corroded run of galvanized pipe that’s seen heavy use, honest advice is often full replacement of the affected sections rather than chasing pinholes year after year. We’ll show you the camera evidence and let you decide.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Kellyville
Chimney work in Kellyville is priced per job by written estimate, and the estimate is free. What drives the cost is straightforward: how accessible the flue is, how much creosote needs removing, whether the cap and storm collar are serviceable or need replacement, and whether the inspection turns up failed pipe sections or clearance problems that need repair. A manufactured-home install with a through-wall assembly takes longer to inspect than a straight vertical run, and that shows up in the estimate. You’ll see the camera footage and a written quote before anything is booked. Call (866) 389-4464 for an exact quote. Estimates are free.
Serving Kellyville, OK – Our Local Coverage Area
We serve Kellyville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Kellyville
Yes. A manufactured-home Gelco system is a listed assembly, so the inspection looks at clearances to combustibles, radiation shields, support boxes, and joint integrity, not just creosote depth. Much of that assembly is hidden behind chasing or skirting, which is why a Level 2 camera inspection matters on these installs. Call (866) 389-4464 to book yours.
Once a year is the baseline, and in Kellyville that usually means before the heating season starts in November. A stove that runs hard on oak and hedge for five months can build creosote faster than a lightly used fireplace, so a mid-season check is worth considering if you burn daily. Call (866) 389-4464 and we’ll help you figure out the right interval.
Often, yes. Heat damage, warped pipe, cracked sections, and failed radiation shields leave evidence that a camera inspection can find. Many Kellyville-area fires get put out by neighbors before a professional sees the flue, so tell us if you’ve had one. Call (866) 389-4464 for an inspection.
Usually. Cap replacement is one of the most common storm-season repairs we do in Kellyville, and it’s typically a quick visit once we’ve matched the cap to your flue size and termination type. If the storm collar or flashing was also damaged, we’ll quote that at the same time. Call (866) 389-4464.
It depends on how far the corrosion has gone. Pinholes in an otherwise sound run can sometimes be addressed, but a 20-year-old galvanized system that’s pitted through the inner liner is usually better replaced than patched, because patch repairs fail again next season. We’ll show you the camera footage and give you a written estimate for both paths. Call (866) 389-4464. Estimates are free.
Service Areas Near Kellyville
We serve homeowners in Kellyville and the surrounding communities, including Gelco service work in Kellyville, and nearby towns like Kiefer, Oakhurst, Kellyville, Broken Arrow, Wagoner, Inola, and Haskell. If you’re on the stretch of old Route 66 between Sapulpa and Bristow, we cover your area.
Book Your Gelco Service in Kellyville Today
Whether it’s a sweep, a Level 2 inspection, a cap replacement, or a decision about replacing a corroded run, we’ll give you a straight answer and a written estimate. Call (866) 389-4464. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Flagship Chimney Sweep.